14 Bolt Front Steering Axle with Magnum Inner C's and Outer Knuckles Kit Overview Image

14 Bolt Front Steering Axle with Magnum C's and Outer Knuckles Kit

14 Bolt Front Steering Axle Magnum Roller Kit with Wilwood Brakes Overview Image

14 Bolt Front Steering Axle Magnum Roller Kit with Wilwood Brakes

14 Bolt Front Steering Axle Magnum Roller Kit

Crane's Axle Builder Kits allow you to create the axle you need all in one place.

The 14 Bolt Magnum Roller Kit Includes:

14 Bolt Re-Tubed Housing (Pass or Driver), Magnum Inner C's, Magnum Outer Knuckles, Interlocking High Steer Arms, and Spindles/Wheel Hubs.

Optional Components: 14 Bolt Diff Cover or 13 Bolt Diff Cover, Rev 14 Seal System for 40 Spline, and 40 Spline Drive Flange Kit

Typical Lead Time: 30-40 Days

Freight Note: Typically around $150 less to a COMMERCIAL address than a RESIDENTIAL address

Click to learn more about this kit

Crane Axle is proudly made in the USA

As low as $5,305.73 was $5,584.98
Availability: In stock
SKU
14 Bolt Magnum Roller Kit

14 Bolt Magnum Roller Kit

Typical Lead Time: 30-40 Days

Freight Note: Typically around $150 less to a COMMERCIAL address than a RESIDENTIAL address

Crane 14 BoltMagnum Roller Kit Front Axle

This Crane Axle Assembly includes a 14 Bolt Re-Tubed Housing (Pass or Driver), Magnum Inner C's, Magnum Outer Knuckles, Interlocking High Steer Arms, and Spindles/Wheel Hubs. A great start to a bad ass Kingpin 60 Front Axle.

Crane Axle starts your axle build with a bulletproof 14 Bolt center section. We then re-tube the housing with 3.5" x 1/2" (.500") DOM tubes.

We MIG weld Crane Axle Magnum Inner C's to the end of the tubing for a strong hold. With this kit, we then add on Crane Axle Magnum Outer Knuckles with the included Kingpin components. These components are top of the line for Off Road use. Installed next are the Interlocking High Steer Arms. The interlocking keys on these arms take the load off of any studs and put it on the knuckles themselves. Say goodbye to broken studs. The Magnum Roller kit also includes Spindles/Wheel Hubs installed before shipment.

Read below for information on specific components.





Included Components

Magnum Inner C's

Crane Axle's Kingpin 60 Inner C is a Heavy Duty alternative to the stock Inner C. Crane's Inner C's are built out of 8620 Chromoly steel for ultimate strength and light weight right here in the USA

  • Built from 8620 Chromoly steel
  • Ultimate strength and reliability
  • Made in USA




Magnum Outer Knuckles

Crane Axle Kingpin 60 Knuckles

Crane Axle's Kingpin 60 Outer Knuckles are built from Chromoly Steel and designed for durability in hardcore Off Road wheelin.

  • Built from Chromoly Steel
  • Ultimate strength and reliability
  • Interlocking keys to High Steer Arms
  • Made in USA




Interlocking High Steer Arms

Crane's Dana 60 Interlocking Hi Steer Arms are made to be used with Crane Dana 60 Outer Knuckles.

  • Built from 1018 CR Steel
  • Superior Strength and Precision Fit
  • Keyed Interlocking system means no more broken studs
  • Measures 10" from Kingpin center to end of arm
  • Overall length of 12 1/8"
  • Made in USA




All Kingpin Components

Included Components are:

  • Crane King Pin Spring Eliminator Kit
  • Upper King Pin Cones w/ Seals
  • Upper King Pin Bushings
  • Lower Bearings/Races and Seals
  • Lower King Pin Caps (trunnions) and Hardware
  • 1/2-20 Spindle Studs




Optional Components

14 Bolt Diff Cover

GM 14 Bolt Diff Cover is designed for an aggressive, low profile and bullet proof option for your GM 14 Bolt front or rear axle. There are many options for Diff covers but only Crane Axle Diff covers offer you a better built, better designed, completely manufactured right here in the U.S.A option

13 Bolt Diff Cover

GM 13 Bolt Diff Cover is designed just like the GM 14 Bolt Diff Cover, but adds more clearance. Modifications will need to be done to your housing to properly fit, but we have a video for that. There are many options for Diff covers but only Crane Axle Diff covers offer you a better built, better designed, completely manufactured right here in the U.S.A option

Rev 14 Seal System for 40 Spline

The Revolution 14 Seal System for 40 Spline solves the problem of sealing the differential of a GM 14 Bolt steering axle. The Revolution 14 Seal Housing replaces the stock 14 bolt carrier bearing pre-load spanners. The Revolution spanners accept the axle seal. This uses a common, readily available seal and places the seal inside where the least amount of movement occurs. The 40 spline version includes a axle guide to help align the shaft while installing it.

40 Spline Drive Flange Kit

The drive puck is for a 40 spline application. The drive pucks are built from 8620 chromoly steel then heat treated. The caps are machined from 6061 aluminum then anodized black with the Crane logo engraved. The kit comes complete with all necessary hardware and o-rings for easy installation. Fits GM and Ford hubs

Crane Axle is proudly made in the USA

More Information
Axle Compatibility 14 Bolt
Crane Axle Builder Kit Kingpin 60 Cs and Outer Knuckles
Write Your Own Review
You're reviewing:14 Bolt Front Steering Axle Magnum Roller Kit
Your Rating