Crane Axle Dana 80 Rear Re-Tubed Housing Axle Kit Overview Image

Dana 80 Rear Re-Tubed Housing Axle Kit

Crane Axle Dana 80 Magnum Roller Rear Steering Axle Kit Overview Image

Dana 80 Magnum Roller Rear Steering Axle Kit

Dana 80 Magnum C's and Knuckles Rear Steering Axle Kit

Crane's Axle Builder Kits allow you to create the Dana 80 axle you are in need of all in one place.

The Dana 80 Magnum C's and Knuckles Rear Steering Axle Kit Includes:

Dana 80 Re-Tubed Housing (Centered for Rear), Magnum Inner C's, Magnum Outer Knuckles, and Interlocking Hi Steer Arms

Optional Components: Dana 80 Seal Housings and Dana 80 Diff Cover

Typical Lead Time: 30-40 Days

Freight Note: Typically around $150 less to a COMMERCIAL address than a RESIDENTIAL address

Click to learn more about this kit

Crane Axle is proudly made in the USA

Special Price $3,961.49 was $4,169.99
Availability: In stock
SKU
Dana 80 Magnum C's and Knuckles Rear Steering Axle Kit

Dana 80 Magnum C's and Knuckles Rear Steering Axle Kit

Typical Lead Time: 30-40 Days

Freight Note: Typically around $150 less to a COMMERCIAL address than a RESIDENTIAL address

Crane Axle Dana 80 Magnum Cs and Knuckles Rear Steering Axle Kit

This Crane Axle Assembly includes a Dana 80 Re-Tubed Housing (Centered for Rear), Magnum Inner C's, Magnum Outer Knuckles, Interlocking High Steer Arms, and all Kingpin Components. A great start to a bad ass Crane Magnum Dana 80 Rear Axle.

Crane Axle starts your axle build with a bulletproof Dana 80 center section. We then re-tube the housing with 4" x 1/2" (.500") DOM tubes.

High strength Magnum components are then MIG welded to the tubing for a strong hold. With this kit, we add on Crane Axle Magnum Inner C's and Magnum Outer Knuckles with the included Kingpin components. These components are top of the line for Off Road use. Finally, we add on the Magnum Interlocking High Steer Arms which are a Crane original. The interlocking keys on these arms take the load off of any studs and put it on the knuckles themselves. Say goodbye to broken studs.

Read below for information on specific components.





Included Components

Magnum Inner C's

Crane Axle's Magnum Inner C's are a Heavy Duty alternative to the stock Inner C. Crane's Inner C's are built out of 8620 Chromoly steel for ultimate strength and light weight right here in the USA

  • Built from 8620 Chromoly steel
  • Ultimate strength and reliability
  • Made in USA




Magnum Outer Knuckles

Crane Axle Magnum Outer Knuckles

Crane Axle's Magnum Outer Knuckles are built from Chromoly Steel and designed for durability in hardcore Off Road wheelin.

  • Built from Chromoly Steel
  • Ultimate strength and reliability
  • Interlocking keys to High Steer Arms
  • Made in USA




Interlocking High Steer Arms

Crane's Magnum Interlocking High Steer Arms are made to be used specifically with Crane Magnum Outer Knuckles.

  • Built from 1018 CR Steel
  • Superior Strength and Precision Fit
  • Keyed Interlocking system means no more broken studs
  • Measures 10" from Kingpin center to end of arm
  • Overall length of 12 1/8"
  • Made in USA




All Kingpin Components

Included Components are:

  • Crane King Pin Spring Eliminator Kit
  • Upper King Pin Cones w/ Seals
  • Upper King Pin Bushings
  • Lower Bearings/Races and Seals
  • Lower King Pin Caps (trunnions) and Hardware
  • 1/2-20 Spindle Studs




Optional Components

Dana 80 Seal Housings

Crane Axle's Dana 80 seal housings are used when building a steering axle. We build the housings to accept (2) inner seals for 2" shafts and O.D. O-rings to seal against I.D. of the axle tube. Fits 4" x .500 wall tubing.

Dana 80 Diff Cover

Crane Axle is proudly made in the USA

More Information
Axle Compatibility Dana 80
Crane Axle Builder Kit Magnum Cs and Knuckles
Write Your Own Review
You're reviewing:Dana 80 Magnum C's and Knuckles Rear Steering Axle Kit
Your Rating