Crane Axle Dana 80 Front Steering Axle Magnum Roller Kit Overview Image

Dana 80 Front Steering Axle Magnum Roller Kit

Crane Axle Dana 80 Front Steering Axle Magnum Ready to Ride Kit Overview Image

Dana 80 Front Steering Axle Magnum Ready to Ride Kit

Dana 80 Front Steering Axle Magnum Roller Kit with Wilwood Brakes

Crane's Axle Builder Kits allow you to create the Dana 80 front axle you are needing all in one place.

The Dana 80 Magnum Roller Kit with Wilwood Brakes Includes:

Dana 80 Re-Tubed Housing (Pass or Driver), Magnum Inner C's, Magnum Outer Knuckles, Interlocking High Steer Arms, Spindles/Wheel Hubs, and Wilwood Brakes.

Optional Components: Dana 80 Seal Housings and Dana 80 Diff Cover

Typical Lead Time: 10 Days

Freight Note: Typically around $150 less to a COMMERCIAL address than a RESIDENTIAL address

Click to learn more about this kit

Crane Axle is proudly made in the USA

As low as $6,724.99
Availability: In stock
SKU
Dana 80 Magnum Roller Kit with Wilwood Brakes

Dana 80 Magnum Roller Kit with Wilwood Brakes

Typical Lead Time: 10 Days

Freight Note: Typically around $150 less to a COMMERCIAL address than a RESIDENTIAL address

Crane Dana 80 Magnum Inner C's and Outer Knuckles Kit

This Crane Axle Assembly includes a Dana 80 Re-Tubed Housing (Pass or Driver), Magnum Inner C's, Magnum Outer Knuckles, Interlocking High Steer Arms, Wilwood Brakes, and all Kingpin Components. A great start to a bad ass Dana 80 Magnum Front Axle.

Crane Axle starts your axle build with a bulletproof Dana 80 center section. We then re-tube the Dana 80 housing with 4" x 1/2" (.500") DOM tubes.

We MIG weld Crane Axle Magnum Inner C's to the end of the tubing for a strong hold. With this kit, we then add on Crane Axle Magnum Outer Knuckles with the included Kingpin components. These components are top of the line for Off Road use. Then, Crane Axle Interlocking High Steer Arms, which are a Crane original, are installed to the Outer Knuckles. The interlocking keys on these arms take the load off of any studs and put it on the knuckles themselves. Say goodbye to broken studs. With this kit, Wilwood Brakes are also added to the axle.

Read below for information on specific components.





Included Components

Magnum Inner C's

Crane Axle's Magnum Inner C is a Heavy Duty alternative to the stock Inner C. Crane's Inner C's are built out of 8620 Chromoly steel for ultimate strength and light weight right here in the USA

  • Built from 8620 Chromoly steel
  • Ultimate strength and reliability
  • Made in USA




Magnum Outer Knuckles

Crane Axle Magnum Knuckles

Crane Axle's Magnum Outer Knuckles are built from Chromoly Steel and designed for durability in hardcore Off Road wheelin.

  • Built from Chromoly Steel
  • Ultimate strength and reliability
  • Interlocking keys to High Steer Arms
  • Made in USA




Interlocking High Steer Arms

Crane's Magnum Interlocking Hi Steer Arms are made to be used with Crane Magnum Outer Knuckles.

  • Built from 1018 CR Steel
  • Superior Strength and Precision Fit
  • Keyed Interlocking system means no more broken studs
  • Measures 10" from Kingpin center to end of arm
  • Overall length of 12 1/8"
  • Made in USA




All Kingpin Components

Included Components are:

  • Crane King Pin Spring Eliminator Kit
  • Upper King Pin Cones w/ Seals
  • Upper King Pin Bushings
  • Lower Bearings/Races and Seals
  • Lower King Pin Caps (trunnions) and Hardware
  • 1/2-20 Spindle Studs




Spindles/Wheel Hubs

Wilwood Brakes

Optional Components

Dana 80 Seal Housings

Crane Axle's Dana 80 seal housings are used when building a steering axle. We build the housings to accept (2) inner seals for 2" shafts and O.D. O-rings to seal against I.D. of the axle tube. Fits 4" x .500 wall tubing.

Dana 80 Diff Cover

Crane Axle is proudly made in the USA

More Information
Axle Compatibility Dana 80
Crane Axle Builder Kit Magnum Roller Kit includes Wilwood Brakes
Write Your Own Review
You're reviewing:Dana 80 Front Steering Axle Magnum Roller Kit with Wilwood Brakes
Your Rating