14 Bolt Kingpin 60 Roller Front Steering Axle Kit with Wilwood Brakes Overview Image

14 Bolt Front Steering Axle Kingpin 60 Roller Kit with Wilwood Brakes

14 Bolt Front Steering Axle with Magnum Inner C's and Outer Knuckles Kit Overview Image

14 Bolt Front Steering Axle with Magnum C's and Outer Knuckles Kit

14 Bolt Front Steering Axle with Kingpin 60 Knuckles Ready to Ride Kit

Crane's Axle Builder Kits allow you to create the axle you need all in one place.

The 14 Bolt with Kingpin 60 Knuckles Ready to Ride Kit Includes:

14 Bolt Re-Tubed Housing (Pass or Driver), Kingpin 60 Inner C's, Kingpin 60 Outer Knuckles, Interlocking High Steer Arms, Spindles/Wheel Hubs, 3/4 Ton Brakes, 30/35 Spline RCV's, 30 Spline Spool, 1350 Yoke, Diff Cover, and all Kingpin Components. This is the Ready to Ride COMPLETE package.

Freight Note: Typically around $150 less to a COMMERCIAL address than a RESIDENTIAL address

Click to learn more about this kit

Crane Axle is proudly made in the USA

As low as $7,926.75 was $8,343.95
Availability: In stock
SKU
14 Bolt with Kingpin 60 Knuckles Ready to Ride Kit

14 Bolt with Kingpin 60 Knuckles Ready to Ride Kit

Freight Note: Typically around $150 less to a COMMERCIAL address than a RESIDENTIAL address

Crane Axle 14 Bolt with Kingpin 60 Knuckles Ready to Ride Kit Front Axle

This Crane Axle Assembly is everything you need to get riding now. Includes a 14 Bolt Re-Tubed Housing (Pass or Driver), Kingpin 60 Inner C's, Kingpin 60 Outer Knuckles, Interlocking High Steer Arms, Spindles/Wheel Hubs, 3/4 Ton Brakes, 30/35 Spline RCV's, 30 Spline Spool, 1350 Yoke, Diff Cover, and all Kingpin Components. A great start to a bad ass 14 Bolt Axle.

Crane Axle starts your axle build with a bulletproof 14 Bolt center section. We then re-tube the housing with 3.5" x 1/2" (.500") DOM tubes.

We MIG weld Crane Axle Kingpin 60 Inner C's to the end of the tubing for a strong hold. With this kit, we then install Crane Axle Kingpin 60 Outer Knuckles with the included Kingpin components. These components are top of the line for Off Road use. Next, installed are the Crane Axle Interlocking High Steer Arms. The interlocking keys on these arms take the load off of any studs and put it on the knuckles themselves. Say goodbye to broken studs. With this being the Kingpin 60 Ready to Ride Complete kit, we also install the Spindles/Wheel Hubs, 3/4 Ton Brakes, 30/35 Spline RCV's, 30 Spline Spool, 1350 Yoke, and Diff Cover

Read below for information on specific components.





Included Components

Kingpin 60 Inner C's

Crane Axle's Kingpin 60 Inner C is a Heavy Duty alternative to the stock Inner C. Crane's Inner C's are built out of 8620 Chromoly steel for ultimate strength and light weight right here in the USA

  • Built from 8620 Chromoly steel
  • Ultimate strength and reliability
  • Made in USA




Kingpin 60 Outer Knuckles

Crane Axle Kingpin 60 Outer Knuckles

Crane Axle's Kingpin 60 Outer Knuckles are built from Chromoly Steel and designed for durability in hardcore Off Road wheelin.

  • Built from Chromoly Steel
  • Ultimate strength and reliability
  • Interlocking keys to High Steer Arms
  • Made in USA




Interlocking High Steer Arms

Crane's Dana 60 Interlocking Hi Steer Arms are made to be used with Crane Dana 60 Outer Knuckles.

  • Built from 1018 CR Steel
  • Superior Strength and Precision Fit
  • Keyed Interlocking system means no more broken studs
  • Measures 10" from Kingpin center to end of arm
  • Overall length of 12 1/8"
  • Made in USA


Spindles/Wheel Hubs & 3/4 Ton Brakes













30/35 Spline RCV's

30 Spline Spool

1350 Yoke













Diff Cover

GM 14 Bolt Diff Cover is designed for an aggressive, low profile and bullet proof option for your GM 14 Bolt front or rear axle. There are many options for Diff covers but only Crane Axle Diff covers offer you a better built, better designed, completely manufactured right here in the U.S.A option









All Kingpin Components

Included Components are:

  • Crane King Pin Spring Eliminator Kit
  • Upper King Pin Cones w/ Seals
  • Upper King Pin Bushings
  • Lower Bearings/Races and Seals
  • Lower King Pin Caps (trunnions) and Hardware
  • 1/2-20 Spindle Studs




Crane Axle is proudly made in the USA

More Information
Axle Compatibility 14 Bolt
Crane Axle Builder Kit Kingpin 60 Cs and Outer Knuckles
Write Your Own Review
You're reviewing:14 Bolt Front Steering Axle with Kingpin 60 Knuckles Ready to Ride Kit
Your Rating