Crane Axle 14 Bolt with Kingpin 60 C's and Knuckles Rear Steering Axle Kit Overview Image

14 Bolt with Kingpin 60 C's and Knuckles Rear Steering Axle Kit

14 Bolt Kingpin 60 Roller Rear Steering Axle Kit with Wilwood Brakes Overview Image

14 Bolt Kingpin 60 Roller Rear Steering Axle Kit with Wilwood Brakes

14 Bolt Kingpin 60 Roller Rear Steering Axle Kit with 3/4 Ton Brakes

Crane's Axle Builder Kits allow you to create the axle you need all in one place.

The 14 Bolt Kingpin 60 Roller Rear Steering Axle Kit with 3/4 Ton Brakes Includes:

14 Bolt Re-Tubed Housing (Centered for Rear), Kingpin 60 Inner C's, Outer Knuckles, Interlocking High Steer Arms, Spindles/Wheel Hubs, 3/4 Ton Brakes, and all Kingpin Components.

Optional Components: 14 Bolt Diff Cover or 13 Bolt Diff Cover, Rev 14 Seal System, and 35 Spline Drive Flange Kit

Typical Lead Time: 30-40 Days

Freight Note: Typically around $150 less to a COMMERCIAL address than a RESIDENTIAL address

Click to learn more about this kit

Crane Axle is proudly made in the USA

Special Price $4,189.44 was $4,409.94
Availability: In stock
SKU
14 Bolt Kingpin 60 Roller Rear Steering Axle Kit with 3/4 Brakes

14 Bolt Kingpin 60 Roller Rear Steering Axle Kit with 3/4 Ton Brakes

Typical Lead Time: 30-40 Days

Freight Note: Typically around $150 less to a COMMERCIAL address than a RESIDENTIAL address

Crane 14 Bolt Kingpin 60 Roller Kit with 3/4 Ton Brakes

This Crane Axle Assembly includes a 14 Bolt Re-Tubed Housing (Centered for Rear), Kingpin 60 Inner C's, Outer Knuckles, Interlocking High Steer Arms, Spindles/Wheel Hubs, 3/4 Ton Brakes, and all Kingpin Components. A great start to a bad ass 14 Bolt Rear Steering Axle.

Crane Axle starts your axle build with a bulletproof 14 Bolt center section. The housing is then re-tubed with 3.5" x 1/2" (.500") DOM tubes.

Next, the Kingpin 60 Inner C's are MIG welded to both ends of the tubing for a strong hold. With this kit, we then add on Crane Axle Kingpin 60 Outer Knuckles, Interlocking High Steer Arms, Spindles, Wheel Hubs, 3/4 Ton Brakes and the included Kingpin components. You'll be out riding in no time.

Read below for information on specific components.





Included Components

Kingpin 60 Inner C's

Crane Axle's Kingpin 60 Inner C is a Heavy Duty alternative to the stock Inner C. Crane's Inner C's are built out of 8620 Chromoly steel for ultimate strength and light weight right here in the USA

  • Built from 8620 Chromoly steel
  • Ultimate strength and reliability
  • Made in USA




Outer Knuckles

Crane Axle Kingpin 60 Knuckles

Crane Axle's Kingpin 60 Outer Knuckles are built from Chromoly Steel and designed for durability in hardcore Off Road wheelin.

  • Built from Chromoly Steel
  • Ultimate strength and reliability
  • Interlocking keys to High Steer Arms
  • Made in USA




Interlocking High Steer Arms

Crane's Dana 60 Interlocking Hi Steer Arms are made to be used with Crane Dana 60 Outer Knuckles.

  • Built from 1018 CR Steel
  • Superior Strength and Precision Fit
  • Keyed Interlocking system means no more broken studs
  • Measures 10" from Kingpin center to end of arm
  • Overall length of 12 1/8"
  • Made in USA


Spindles, Wheel Hubs, and 3/4 Ton Brakes













All Kingpin Components

Included Components are:

  • Crane King Pin Spring Eliminator Kit
  • Upper King Pin Cones w/ Seals
  • Upper King Pin Bushings
  • Lower Bearings/Races and Seals
  • Lower King Pin Caps (trunnions) and Hardware
  • 1/2-20 Spindle Studs




Optional Components

14 Bolt Diff Cover

GM 14 Bolt Diff Cover is designed for an aggressive, low profile and bullet proof option for your GM 14 Bolt front or rear axle. There are many options for Diff covers but only Crane Axle Diff covers offer you a better built, better designed, completely manufactured right here in the U.S.A option

13 Bolt Diff Cover

GM 13 Bolt Diff Cover is designed just like the GM 14 Bolt Diff Cover, but adds more clearance. Modifications will need to be done to your housing to properly fit, but we have a video for that. There are many options for Diff covers but only Crane Axle Diff covers offer you a better built, better designed, completely manufactured right here in the U.S.A option

Rev 14 Seal System

The Revolution 14 Seal System solves the problem of sealing the differential of a GM 14 Bolt steering axle. This uses a common, readily available seal and places the seal inside where the least amount of shaft movement occurs. Includes sealant for the seal housing threads also.

35 Spline Drive Flange Kit

The drive puck is for a 35 spline application. The drive pucks are built from 8620 chromoly steel then heat treated. The caps are machined from 6061 aluminum then anodized black with the Crane logo engraved. The kit comes complete with all necessary hardware and o-rings for easy installation. Fits GM and Ford hubs

Crane Axle is proudly made in the USA

More Information
Axle Compatibility 14 Bolt
Crane Axle Builder Kit Kingpin 60 Roller Kit includes 3/4 Ton Brakes
Write Your Own Review
You're reviewing:14 Bolt Kingpin 60 Roller Rear Steering Axle Kit with 3/4 Ton Brakes
Your Rating