Dana 80 Magnum Ready to Ride Rear Steering Axle Kit
Crane's Axle Builder Kits allow you to create the axle you need all in one place.
The Dana 80 Magnum Ready to Ride Rear Steering Axle Kit Includes:
Dana 80 Re-Tubed Housing (Centered for Rear), Magnum Inner C's, Magnum Outer Knuckles, Interlocking High Steer Arms, Ring/Pinion, Locker, Spindles/Wheel Hubs, Wilwood Brakes, 40/47 Spline Big Bell RCV's, and Dana 80 Diff Cover. This is the Ready to Ride COMPLETE Rear Steer package.
Freight Note: Typically around $150 less to a COMMERCIAL address than a RESIDENTIAL address
Click to learn more about this kit
Dana 80 Magnum Ready to Ride Rear Steering Axle Kit
Freight Note: Typically around $150 less to a COMMERCIAL address than a RESIDENTIAL address
This Crane Axle Assembly includes a Dana 80 Re-Tubed Housing (Centered for Rear), Magnum Inner C's, Magnum Outer Knuckles, Interlocking High Steer Arms, Ring/Pinion, Locker, Spindles/Wheel Hubs, Wilwood Brakes, 40/47 Spline Big Bell RCV's, and Dana 80 Diff Cover. This is the Ready to Ride COMPLETE Rear Steer package.
Crane Axle starts your axle build with a bulletproof Dana 80 center section. We then re-tube the Dana 80 Housing with 4" x 1/2" (.500") DOM tubes.
We MIG weld Crane Axle Magum Inner C's to the end of the tubing for a strong hold. With this kit, we then add on Crane Axle Magnum Outer Knuckles with the included components. These components are top of the line for Off Road use. Interlocking High Steer Arms are installed onto the Knuckles. The interlocking keys on these arms take the load off of any studs and put it on the knuckles themselves. Say goodbye to broken studs. Additionally, Ring & Pinion, Lockers, Spindles/Wheel Hubs, Wilwood Brakes, 40/47 Spline Big Bell RCV's, and a Dana 80 Diff Cover are all installed.
Read below for information on specific components.
Included Components
Magnum Inner C's
Crane Axle's Kingpin 60 Inner C is a Heavy Duty alternative to the stock Inner C. Crane's Inner C's are built out of 8620 Chromoly steel for ultimate strength and light weight right here in the USA
- Built from 8620 Chromoly steel
- Ultimate strength and reliability
- Made in USA
Magnum Outer Knuckles
Crane Axle's Kingpin 60 Outer Knuckles are built from Chromoly Steel and designed for durability in hardcore Off Road wheelin.
- Built from Chromoly Steel
- Ultimate strength and reliability
- Interlocking keys to High Steer Arms
- Made in USA
Interlocking High Steer Arms
Crane's Dana 60 Interlocking Hi Steer Arms are made to be used with Crane Dana 60 Outer Knuckles.
- Built from 1018 CR Steel
- Superior Strength and Precision Fit
- Keyed Interlocking system means no more broken studs
- Measures 10" from Kingpin center to end of arm
- Overall length of 12 1/8"
- Made in USA
All Kingpin Components
Included Components are:
- Crane King Pin Spring Eliminator Kit
- Upper King Pin Cones w/ Seals
- Upper King Pin Bushings
- Lower Bearings/Races and Seals
- Lower King Pin Caps (trunnions) and Hardware
- 1/2-20 Spindle Studs
Video Overview of the Magnum Knuckles:
| Axle Compatibility | Dana 80 |
|---|---|
| Crane Axle Builder Kit | Magnum Ready to Ride Kit |
