Yukon Ford 10.5" Full Float Rear Wheel Bearing & Seal Kit
AK F10.5-A
The Yukon Ford 10.5" Full Float Rear Wheel Bearing & Seal Kit provides the inner and outer wheel bearings, matching races, and wheel seal needed to service one rear wheel end on compatible Ford Super Duty, Excursion, and other listed Ford rear axle applications. Built with Timken bearing components, this kit is a practical solution for replacing worn hub bearings, repairing leaking wheel seals, or refreshing a heavy-duty rear axle. It's well suited for tow rigs, work trucks, fleet vehicles, and off-road builds that put serious mileage and load on their wheel-end assemblies.
Full-float rear axles use separate inner and outer wheel bearings to support the hub and vehicle weight while the axle shaft transfers driving torque. Worn bearings can create excessive hub movement, noise, heat, and damage to the spindle or hub if left unchecked. This Yukon kit includes both bearings, their matching races, and a wheel seal so the major wear components can be serviced together. Before installation, confirm the axle model and inspect the hub, spindle, bearing surfaces, and seal contact area to make sure the new components have a solid foundation.
Includes:
- (1) Inner Rear Wheel Bearing
- (1) Outer Rear Wheel Bearing
- Matching Inner & Outer Bearing Races
- (1) Rear Wheel Seal
Important: This kit services one rear wheel end. Order quantity (2) to service both sides of a compatible rear axle. Verify the installed axle platform and wheel bearing configuration before ordering.
Specifications
| Manufacturer | Yukon Gear & Axle |
|---|---|
| Part Number | AK F10.5-A |
| Product Type | Rear Wheel Bearing & Seal Kit |
| Axle Platform | Ford 10.5" |
| Axle Design | Full Float Applications |
| Bearing Manufacturer | Timken |
| Axle Position | Rear / One Wheel End |
| Inner Wheel Bearing | Included |
| Outer Wheel Bearing | Included |
| Bearing Races | Inner & Outer Included |
| Wheel Seal | Included |
| Installation Type | Rear Hub Bearing & Wheel Seal Replacement |
| Primary Application | Ford 10.5" Rear Axle Wheel-End Service, Towing & Heavy-Duty Truck Maintenance |
| Quantity | One Wheel Bearing & Seal Kit / One Side |
Fitment
Designed for compatible Ford 10.5" full-float rear axle applications and the additional Ford rear axle applications listed below. Final fitment depends on the installed axle, hub, spindle, and wheel bearing configuration.
| Make | Model | Year Range | Axle Application |
|---|---|---|---|
| Ford | Excursion | 2000–2005 | Ford 10.5" Rear Axle |
| Ford | F-250 | 1999 | Ford 10.5" Rear Axle |
| Ford | F-250 Super Duty | 1999–2014 | Ford 10.5" Rear Axle |
| Ford | F-350 Super Duty | 1999–2013 | Ford 10.5" Rear Axle |
| Ford | Transit-150 | 2015–2020 | Ford Rear Axle - Verify Configuration |
| Ford | Transit-250 | 2015–2020 | Ford Rear Axle - Verify Configuration |
| Ford | Transit-350 | 2015–2020 | Ford Rear Axle - Verify Configuration |
| Ford | Transit-350 HD | 2015–2020 | Ford Rear Axle - Verify Configuration |
Fitment Notes:
- Designed for compatible Ford 10.5" full-float rear axle applications
- Includes Timken inner and outer wheel bearings, matching races, and wheel seal
- Services one rear wheel end
- Order quantity (2) to service both sides
- Not a differential carrier or pinion bearing kit
- Verify axle identification, hub, spindle, and wheel bearing dimensions before ordering
- Ford Transit applications require confirmation of the specific rear axle and wheel-end configuration
- Not intended as a universal replacement for every Ford rear axle
- Inspect the spindle and hub for scoring, wear, or overheating before installation
Builder Note: Ford used different rear axle and wheel-end configurations across Super Duty and Transit platforms. Don't select a bearing kit based on the vehicle model alone. Confirm the installed axle and bearing arrangement, especially on trucks that have been modified or axle-swapped.
FAQ
What comes in the Yukon AK F10.5-A bearing kit?
This kit includes one inner wheel bearing, one outer wheel bearing, matching bearing races, and one wheel seal. It provides the major components needed to service one rear wheel end on a compatible Ford axle.
Will this kit fit my Ford F-250 or F-350 Super Duty?
This kit is listed for compatible Ford Super Duty rear axle applications equipped with the specified Ford 10.5" axle. Verify the installed axle model and wheel bearing configuration before ordering because different rear axle options were available.
Does this kit fit a Ford Excursion?
It is listed for compatible 2000–2005 Ford Excursion rear axle applications. Confirm the installed Ford 10.5" axle and wheel-end components before ordering.
Will this kit fit a Ford Transit van?
The supplied application list includes select 2015–2020 Ford Transit models, but the rear axle and wheel-end configuration must be confirmed before ordering. Not every Transit uses the same axle assembly or bearing arrangement.
What is the difference between a full-float and semi-float rear axle?
A full-float axle uses a separate hub and wheel bearing assembly to support vehicle weight, while the axle shaft primarily transfers driving torque. A semi-float axle shaft carries both driving torque and vehicle weight. This kit is intended for compatible full-float wheel-end applications.
Does this kit include bearings and seals for both rear wheels?
No. This kit services one rear wheel end. Order quantity (2) to replace the bearings and seals on both sides of a compatible rear axle.
Are Timken bearings included?
Yes. The supplied kit specifications identify Timken bearing components along with the matching races and wheel seal.
Should I replace the bearing races when replacing wheel bearings?
Yes. Bearings and races work together and should generally be replaced as a set during wheel-end service. This kit includes the matching races for both the inner and outer bearings.
Does this kit include differential carrier or pinion bearings?
No. This is a rear wheel-end bearing and seal kit. It does not include differential carrier bearings, pinion bearings, or ring and pinion setup components.
What should I inspect during a rear wheel bearing replacement?
Inspect the spindle journals, hub bearing bores, wheel seal contact surfaces, and retaining hardware. Look for scoring, heat discoloration, corrosion, or abnormal wear. Follow the axle manufacturer's bearing adjustment and lubrication procedures during reassembly.