Rear 05+ Super Duty Unit Bearing Light Weight Brake Kit
A Light Weight Brake Kit with every component handpicked for Off Road Performance in mind. It is an all inclusive COMPLETE Kit including everything needed to bolt on brakes to your Crane Unit Bearing Magnum Knuckle axles.
- 2 - Wilwood 4 Piston Calipers & Brake Pads
- 2 - Wilwood 13.5" Vented Rotors
- 2 - Crane Axle Brake Hats
- 2 - Crane Axle Bolt-On Rear Brake Brackets
- All Necessary Hardware to Install
- Rotor Bolts are Safety Wire Ready
Forged Wilwood Dynalite 4 Piston Calipers
More pistons simply equal more force and can stop you faster. The 4 pistons on each caliper create an overall total piston area of 4.80”.
Forged Billet Calipers have an overall greater strength and reliability. The forging substantially increases resistance to deflection and caliper separation under load. The reduced deflection tendencies and the resulting decrease in fluid volume displacement translate to increased clamping efficiency with less pedal travel.
13.5" Rotors for More Stopping Power
The larger 13.5" Wilwood Vented Rotors produce more stopping force than smaller rotors by generating more torque on the wheel. At 13.5”, the rotor is running through the pads faster and generating more friction for the same pressure. This allows for more braking power for a less amount of pressure.
Light Weight to Reduce Unsprung Weight and Rotating Mass
With rotors weighing only 13.4 lb and calipers at 3.4 lb, this kit will reduce your overall unsprung weight and rotating mass. Reducing unsprung weight will improve the response of your shock absorbers and keep your tires in contact with the ground more efficiently. The less rotating mass means more acceleration and stopping capability.
CNC Machined Rotor Hats
The Crane Axle Rotor Hats are CNC precision-machined from 6061 alumininum for high strength and attention to minimized weight. After machining, these rotor hats are coated for corrosion resistance. They are offset for perfect fitment that you won't find elsewhere besides this kit.
They will fit both 8 on 6.5 and 8 on 170mm wheel bolt patterns.
Fit Double Bead Lock Wheels
This Brake Kit is one of the first on the market that will fit Double Bead Lock Wheels.
Compatible with the Magnum Knuckle Unit Bearing Adapter
Laser cut 3/8” steel brake caliper brackets were designed to easily bolt on to Unit Bearing Adapters within minutes.
Includes:
- 2 - Wilwood 4 Piston Calipers & Brake Pads
- 2 - Wilwood 13.5" Vented Rotors
- 2 - Crane Axle Brake Hats
- 2 - Crane Axle Bolt-On Rear Brake Brackets
- All Necessary Hardware to Install
- Rotor Bolts are Safety Wire Ready
