Yukon Jeep Cherokee XJ Chrysler 8.25" Rear Axle Shaft - 29-Spline, 1541H
YA C52098902
The Yukon Jeep Cherokee XJ Chrysler 8.25" 29-Spline Rear Axle Shaft is a heavy-duty replacement for 1997–2001 Jeep Cherokee XJ models equipped with the Chrysler 8.25" rear axle. Built from heat-treated 1541H alloy steel, this shaft is designed to handle the added drivetrain loads created by larger tires, locking differentials, and regular off-road use. It's a practical upgrade for daily-driven Cherokees, weekend trail rigs, and off-road builds that need a stronger rear axle shaft without stepping up to a premium chromoly option.
With a 29-13/16" overall length and dual 5x4.5" and 5x5.5" wheel bolt patterns, this Yukon axle shaft works with compatible factory-style and modified wheel configurations. The 29-spline design matches later Chrysler 8.25" rear differential applications, while the 1541H alloy construction provides a good balance of strength, toughness, and value. Whether you're replacing a worn shaft or upgrading before installing larger tires, the important part is confirming the axle spline count, shaft length, and wheel-end configuration before installation.
Includes:
- (1) Yukon 1541H Alloy Chrysler 8.25" Rear Axle Shaft - 29-Spline
Important: Sold individually. Order quantity (2) to replace both rear axle shafts. Designed for compatible 29-spline Chrysler 8.25" rear axles and fits either the left or right side. Verify axle identification and spline count before ordering.
Specifications
| Manufacturer | Yukon Gear & Axle |
|---|---|
| Part Number | YA C52098902 |
| Product Type | Rear Axle Shaft |
| Axle Platform | Chrysler 8.25" |
| Vehicle Platform | Jeep Cherokee XJ |
| Model Years | 1997–2001 |
| Axle Shaft Material | 1541H Alloy Steel |
| Axle Spline Count | 29-Spline |
| Axle Shaft Length | 29-13/16" |
| Axle Shaft Position | Rear / Left or Right |
| Wheel Bolt Pattern | 5x4.5" / 5x5.5" |
| Wheel Stud Configuration | 5-Lug |
| Heat Treatment | Heat-Treated Alloy Steel |
| Differential Compatibility | Chrysler 8.25" / 29-Spline |
| Installation Type | Rear Axle Shaft Replacement |
| Primary Application | Jeep Cherokee XJ Rear Axle Replacement, Trail Riding & Off-Road Upgrades |
| Quantity | Sold Individually |
Fitment
Designed for 1997–2001 Jeep Cherokee XJ models equipped with the Chrysler 8.25" rear axle and 29-spline differential. Fits either the driver-side or passenger-side rear axle position on compatible applications.
| Make | Model | Year Range | Axle Application |
|---|---|---|---|
| Jeep | Cherokee XJ | 1997–2001 | Chrysler 8.25" Rear / 29-Spline |
Fitment Notes:
- Fits compatible 1997–2001 Jeep Cherokee XJ Chrysler 8.25" rear axle applications
- Requires a 29-spline differential configuration
- 29-13/16" overall axle shaft length
- Fits left or right rear axle positions
- Double-drilled for factory 5x4.5" and aftermarket 5x5.5" wheel bolt patterns
- Not compatible with earlier 27-spline Chrysler 8.25" differentials without the appropriate conversion
- Not intended for Jeep XJ Dana 35 rear axle applications
- Verify axle identification, spline count, shaft length, and wheel-end configuration before ordering
- Confirm compatibility with modified, aftermarket, or axle-swapped housings
Builder Note: Jeep Cherokee XJ models were equipped with different rear axle configurations over the years. Some use a Dana 35, while Chrysler 8.25" axles were produced with different spline counts. Verify the installed axle and spline count before ordering rather than relying on the vehicle year alone.
FAQ
What is the advantage of a 1541H alloy rear axle shaft?
1541H alloy steel provides a good balance of strength, toughness, and value for rear axle applications. It's a practical upgrade for Jeep Cherokee XJ builds running larger tires, locking differentials, or seeing regular trail use without stepping up to a premium 4340 chromoly shaft.
Will this axle shaft fit my Jeep Cherokee XJ?
This shaft is designed for compatible 1997–2001 Jeep Cherokee XJ models equipped with a Chrysler 8.25" rear axle and 29-spline differential. Verify your axle configuration before ordering because not every Cherokee XJ uses the same rear axle.
What is the difference between 27-spline and 29-spline Chrysler 8.25" axles?
Chrysler 8.25" rear axles were produced with different axle shaft spline counts. Earlier versions commonly used 27-spline shafts, while later applications used 29-spline shafts. The axle shaft must match the installed differential side gears or locker, so these configurations are not directly interchangeable.
Will this axle shaft fit either side of my Jeep?
Yes. This 29-13/16" rear axle shaft is designed for either the driver-side or passenger-side position on compatible Chrysler 8.25" Jeep Cherokee XJ rear axles.
Does this listing include both rear axle shafts?
No. This listing includes one rear axle shaft. Order quantity (2) if you're replacing both rear axle shafts.
What wheel bolt patterns does this axle shaft support?
The axle flange is double-drilled for 5x4.5" and 5x5.5" wheel bolt patterns. This provides flexibility for factory-style Cherokee wheels and compatible aftermarket wheel configurations. Verify wheel studs, brake components, and wheel fitment before installation.
Can I use this axle shaft with an aftermarket locker?
Yes, provided the locker is designed for compatible 29-spline Chrysler 8.25" axle shafts. Verify the differential spline count and complete axle configuration before installation.
Does this axle shaft include bearings or seals?
No. This listing includes the axle shaft only. Bearings, seals, wheel studs, and other installation components are not listed as included. Inspect existing components and replace worn parts during installation.
What should I inspect when replacing a rear axle shaft?
Inspect the axle bearings, seals, differential side gear splines, axle housing, and wheel-end components. Confirm the shaft is properly retained and rotates freely before returning the vehicle to service.