WOD Large Front Axle Truss Link Mount Tab
F021058
These Wide Open Design Large Front Truss Link Tabs create a strong, repeatable mounting point for suspension links on a front axle truss. Designed to work with Small Front Truss Link Tabs, they allow builders to fine-tune link angle, separation, and suspension geometry for a specific off-road application.
Each tab is precision laser cut from 1/4" high-strength plate steel for clean edges, consistent dimensions, and a weld-ready surface. Simply position, tack, and weld to create a professional suspension mounting point without hand-cutting individual brackets.
Includes:
- (1) Large Front Axle Truss Link Tab
Note: Two tabs are required to mount one suspension link.
Specifications
| Specification | Details |
|---|---|
| Part Number | F021058 |
| Product Type | Front Truss Suspension Link Tab |
| Material | 1/4" High-Strength Plate Steel |
| Overall Length | 5.375" Including Overlap |
| Base to Hole Center | 2.250" |
| Hole Diameter | 1/2" |
| Manufacturing Method | Precision Laser Cut |
| Installation | Weld-On |
| Condition | Weld-Ready |
| Compatible Tabs | Short, Medium, or Long Truss Link Tabs |
| Quantity Required Per Link | 2 Tabs |
| Country of Origin | Made in the USA |
Fitment
Universal Weld-On Fitment
- Front axle trusses
- Custom linked suspension systems
- Rock crawlers
- Rock bouncers
- Ultra4 race vehicles
- Trail rigs
- Tube chassis and custom fabrication projects
Fitment Notes:
- Two tabs are required to mount one suspension link.
- Can be paired with different-height truss tabs to adjust link angle and separation.
- Verify joint width, bolt size, suspension geometry, and truss clearance before final welding.
- Professional welding is recommended for structural suspension applications.
| Feature | Small Front Truss Link Tab | Large Front Truss Link Tab |
|---|---|---|
| Part Number | F021083 | F021058 |
| Material | 1/4" High-Strength Plate Steel | 1/4" High-Strength Plate Steel |
| Overall Length | 4.875" Including Overlap | 5.375" Including Overlap |
| Base to Hole Center | 1.750" | 2.250" |
| Hole Diameter | 1/2" | 1/2" |
| Manufacturing Method | Laser Cut | Laser Cut |
| Condition | Weld-Ready | Weld-Ready |
| Best Use | Lower Link Angle or Tight Clearance | Higher Link Angle or Increased Separation |
| Quantity Required Per Link | 2 Tabs | 2 Tabs |
| Made in USA | Yes | Yes |
FAQ
Why are large link tabs used?
Large front truss tabs increase vertical separation between suspension mounting points, allowing builders to optimize anti-squat, anti-dive, roll center, and suspension articulation.
Why use laser-cut tabs?
Laser-cut tabs provide consistent dimensions, proper hole alignment, and clean edges that reduce fabrication time while improving fit and weld quality.
Why are two tabs required?
A suspension joint mounts between two tabs using a single through-bolt. One product includes one tab, so two tabs are required to mount one suspension link.
What's the difference between the small and large tabs?
The larger tab increases the distance from the mounting surface to the bolt centerline, providing additional suspension separation and allowing greater geometry adjustment compared to the small version.